Blog

Solar light 200w 5 Repairing Tips for Beginners

2021.09.24

How to fix solar lights 200w and why lights don’t work

Solar lights 200w are a type of lamp that many consumers choose because of its benefits to people such as cost savings, environmental protection, easy installation, etc. Using them comes with the same problems as most other electronic devices.

Solar light 200w

  • Firstly, check that there is no force tab on the battery
  • Secondly, to cover the panel test the light
  • Make sure solar panel is free of debris
  • The panel must be in the right place
  • Moreover, if it a possible test with a standard battery of solar light 200w
  • Now turn off the battery for 72 hours
  • The battery will start working.

The manifestations of solar lights 200w that you need to pay attention to are:

  • The light of the lamp is weak, dimmer than when bought new.
  • The lamp does not illuminate.
  • Energy does not enter the reserve battery.

Solar panels are covered by something else

Shade is one of the reasons why solar lights 200w cannot charge optimally, so at night they will not work for a long time. In addition, the trees around the garden can grow larger and form a rather large shade, blocking sunlight from reaching the solar panel of the lamp.

To avoid this situation, you should prune the surrounding trees regularly or quickly place the lights away from the shade to absorb maximum energy. The solar panel works in the shade but does not give the effective results that we want. So make sure to keep the panel in light.

Install solar lights 200w in places with lots of artificial light

Solar panels are equipped with optical sensors that can detect light from outside to turn on and off the lights automatically without human intervention. That’s why our home solar light 2000w don’t workplaces near to the light.

If the light doesn’t come on or goes off too soon, you should cover the optical sensor with something to check if this is the problem. If, after doing this, the lamp begins to work, it is best to install the lamp in a location away from other light sources.

Solar light 200w 2021

The rechargeable battery is not fully charged

Solar lights 200w can not be fully charged is also a reason why the lamp equipment does not work well. This often falls on cloudy days, shorter days than nights, or on cold days where batteries are less efficient at storing energy.

The way to check if the rechargeable batteries are damaged is to try replacing them with a regular battery, to see if the light works. Note if testing the light during the day, don’t forget to cover it or place the light in a dark room for the trigger sensor to turn on the device.

Dirty solar panels and solar lights 200w

Solar light 200w installed on the top of the lights will often get dusty and accumulate over time, thereby making them unable to absorb sunlight. In addition to the above reasons, solar lights may have damaged internal components that need to be disassembled.

Remove any debris by removing or using a fine wet cloth combined with a small amount of soap to remove any soiling. After cleaning, you need to use a clean dry cloth to thoroughly wipe the water remaining on the device.

How to repair solar lights efficiently

1. Disassemble your luminaire

There can be many defaults in the solar light 200w. It is recommended that you use the instruction sheet that came with your lamp to disassemble the product so that the interior of the device can be seen.

However, internal damage to solar panels can be caused by poor component quality choices or incorrect production. Experts usually remove the lenses from the solar panels so that they may be fixed or replaced.

2. Check if the lamp is waterproof

Some solar lights are all-weather resistant but are also waterproof. They are waterproof so that in the unlikely event they are not damaged by water. When solar light 200w is built numerous components are employed to make them waterproof.

Be sure to remove any liquid found inside the lamp. Due to this protective layer, the solar panel cannot get proper light. So to get good results from solar panels, this protective film must be removed prior. So that the battery receives more light in the daytime.

3. Remove the battery and check for corrosion

Corrosion is a big problem for solar lights 200w. It is identified as a white powder coating on the outer surface or storage battery of the device. You can remove this layer of corrosion with a soft brush or use sandpaper to remove the more difficult layer of corrosion.

After cleaning, the battery and removing all the debris battery should be safely reinstalled. It is also important to ensure that the battery is properly placed and in contact with the metal receptors inside the battery case.

4. Check wire contact

The power cord can be broken by an animal bite or by a heavy object, which can damage the lamp. You need to check if they are broken, frayed, or not. Some manufacturers offer a warranty on the power cord and may replace the product’s cord with another.

  • If this is not an option, electrical tape can be used to fix frayed wires,
  • soldering the wires together is also a fix.

5. Reinstall solar lights 200w

After ensuring that the lamp internals is in good working order again, follow the instructions to reassemble the lamp unit. With the reasons and instructions on how to fix solar lights200w  that we give, we hope that you will soon be able to fix your lights problem.

Construction of solar-powered lights

Although solar lights are manufactured in many different designs, all of these lights share a common structure consisting of 6 parts:

  • The solar panels absorb energy from the sun and convert it into electricity for use.
  • The controller is a modern part of the structure of solar lights 200w.
  • It disconnects energy from the solar panel when is fully charged.
  • A battery stores the power and supplied to the equipment.
  • A bulb that is installed in the solar lamp is an LED bulb and it is energy saving.
  • The lamp body is made of aluminum, plastic, or alloy. They come in different varieties.
  • The light switch is at the back of the lamp to switch it on or off.

Solar lights have a simple structure

Rechargeable lights are a kind of smart electronic goods. So that when you need to buy, go to reputable stores and choose the solar light that you need. Solar light 200w is good to avoid buying fake goods, imitation goods, poor quality goods.

Solar light 200w generates clean and pure energy from the sun. Instaling solar panels in your home will help combat greenhouse gas emissions and reduce our collective dependence on fossil fuels.

< Prev
ALL
Next >

    Quick Contact Info

    ADD.

    Room 2120, Hongfa center Building, No.1004, Xinhu  Road, Bao'an District, Shenzhen,China.

    icon_up
    icon_close_white
    icon_loading Loading