Adjustable LED Module All In One Solar Street Light (SLA)

This series of products innovatively adopt adjustable Angle design LED module, and each module can be adjusted the angle independently to meet the lighting requirements of different road conditions. It adopts super bright Philips led chips and large-capacity LifePo4 lithium batteries. The maximum power can be up to 120W.

The Detail of Adjustable LED Module

Because the light of the LED light source has strong directivity, in order to achieve a better lighting effect, it is sometimes necessary to adjust the illuminance direction of the lamp. For example, road lighting lamps with high-power integrated modules are widely used. The general method is to adjust the bending angle of the lamp pole, or adjust the lamp interface and the lamp pole joint to change the direction of the light source to meet the requirements of road lighting. However, after the pole or lamp is fixedly installed, the illumination range of the lamp is determined. Therefore, it is difficult to adjust the illumination angle of the lamp according to the width of the road during use. Therefore, it is necessary to manufacture lamps with different inclination according to the width of the road. , Increase the production cost, and it is not conducive to mass production and subsequent installation and debugging. During installation, the illumination angle and scope of the LED street lamp cannot be adjusted according to the actual situation such as the height of the pole and the distance between the poles, and the joint The angle adjustment structure is complicated and the positioning is not accurate, so that the best lighting effect cannot be achieved. The AN-SLA series integrates the angle-adjustable design of the LED module, which perfectly solves the above problems and greatly improves the applicability of the lamp.